Key points

  • MIT researchers built a flapping-wing microrobot that senses and computes onboard, without relying on a lab motion-capture system.
  • Enlarging the soft artificial muscles by 50 percent raised net lift by 46 percent, for a lift-to-weight ratio of 1.9.
  • Test flights stayed within a few centimeters of target positions, and the electronics used only about 6 percent of total power.
  • The robot still runs on an offboard power source. The team plans to add a camera, batteries and power electronics.

Engineers at MIT have built a flapping-wing microrobot, roughly the size and shape of a microcassette, that carries its own sensors and computing hardware. It can fly outside the lab's motion-capture setup, the team reports in Science Robotics. Earlier versions of this featherweight flier had to stay linked to a lab motion-capture system to navigate. Kevin Chen, an associate professor in MIT's Department of Electrical Engineering and Computer Science and a co-corresponding author, calls the result an important milestone for the research community.

To carry the extra weight, the researchers adjusted the radius and length of the soft artificial muscles that flap the robot's four wings. Making the muscles 50 percent larger raised net lift by 46 percent. That gave a lift-to-weight ratio of 1.9, enough to carry a 244-milligram electronics package. The package holds a microcontroller and three sensors: an inertial measurement unit for orientation, an optical flow sensor for sideways speed and position, and a time-of-flight sensor for height. To limit drift, a simplified estimation algorithm updates the robot's position quickly and often instead of slowly and more precisely.

In tests, the robot hovered at several heights and flew point-to-point routes, missing its target positions by just a few centimeters. An operator then used a joystick to send it high-level position targets, and it wove around several plants before landing on a sunflower. The electronics use only about 6 percent of the robot's total power.

The robot still draws power through a cable from an offboard source. Next, the team wants to add a camera so the robot can recognize objects and avoid obstacles. They also want to fit batteries and power electronics onboard so it can fly outdoors without a tether. Possible uses they describe include pollinating crops and spotting pests early.

Why it matters

Until now, these microrobots could navigate only while linked to a lab motion-capture system. Doing the sensing and computing onboard moves them closer to jobs where bigger robots can't be used, such as pollination and industrial surveillance.

What we don't know yet

The robot still draws power through a cable from an offboard source. During the sunflower landing, a person used a joystick to send it high-level position targets. Free outdoor flight will require onboard batteries and power electronics, which the team is still working toward.

Terms in this story

Motion capture
A system of external cameras that tracks an object's exact position in a room, often used to guide small robots in labs.
Inertial measurement unit
A sensor that measures rotation and acceleration so a device can work out how it is tilted and turning.
Optical flow sensor
A small camera-like sensor that estimates motion by tracking how the scene below it shifts from frame to frame.

Sources and verification

  1. This featherweight, flying robot carries its own sensors and computers Massachusetts Institute of Technology · Nov 18, 2026
Fact-checked against the source on November 19, 2026: 26 factual claims verified.
Written in our own words: longest phrase shared with the source is 9 words.
Illustration created by DexScience; no third-party image was used.

DexScience articles are produced with AI assistance and an automated fact-check against the linked sources. Spotted an error? Tell us and we will correct it openly.